Operation of gas pipelines
Reviews 0
Secure deal
Instant delivery
Product description
Task number 1
Determine the throughput of the MG section with a length l = (130 2n ٭) kilometers and an inner diameter D = (1250-10n) millimeters. The pressure and temperature of the gas at the beginning of the section P1 = (6.61 - 0.05n) MPa and T1 = (282.5 - 0.5n) K. The pressure at the end of the section P2 = 5.0 MPa. Soil temperature T0 = (276.75 0.25n). Gas with a relative density Δ = (0.59 0.002n) is transported. Assess the effect of accuracy in determining the temperature and gas pressure on the accuracy of determining the throughput of a site.
Laboratory work No. 1
Investigation of the gas flow in the MG section.
Objective. Establish patterns of gas flow through a gas pipeline.
Tasks of work:
1) familiarization with application programs and with the characteristics of the experimental site;
2) planning and conducting an experiment to study the distribution of pressure along the length of the plot. The required accuracy in determining the pressure is set by the teacher;
3) processing the results of the experiment;
4) presentation of the results of the experiment and calculations in the form of graphs of pressure, pressure squared, temperature, density and gas flow velocity along the length of the section;
5) draw conclusions about the nature of the distribution of the studied parameters along the length of the plot and about the factors and physical quantities that determine it.
Content
1) laboratory setup description
2) experimental technique
3) experimental results
4) processing of experimental results
5) the result in the form of tables and graphs
6) conclusion
Determine the throughput of the MG section with a length l = (130 2n ٭) kilometers and an inner diameter D = (1250-10n) millimeters. The pressure and temperature of the gas at the beginning of the section P1 = (6.61 - 0.05n) MPa and T1 = (282.5 - 0.5n) K. The pressure at the end of the section P2 = 5.0 MPa. Soil temperature T0 = (276.75 0.25n). Gas with a relative density Δ = (0.59 0.002n) is transported. Assess the effect of accuracy in determining the temperature and gas pressure on the accuracy of determining the throughput of a site.
Laboratory work No. 1
Investigation of the gas flow in the MG section.
Objective. Establish patterns of gas flow through a gas pipeline.
Tasks of work:
1) familiarization with application programs and with the characteristics of the experimental site;
2) planning and conducting an experiment to study the distribution of pressure along the length of the plot. The required accuracy in determining the pressure is set by the teacher;
3) processing the results of the experiment;
4) presentation of the results of the experiment and calculations in the form of graphs of pressure, pressure squared, temperature, density and gas flow velocity along the length of the section;
5) draw conclusions about the nature of the distribution of the studied parameters along the length of the plot and about the factors and physical quantities that determine it.
Content
1) laboratory setup description
2) experimental technique
3) experimental results
4) processing of experimental results
5) the result in the form of tables and graphs
6) conclusion
Main features
- Content type File
- Content description 441 kB
- Added to the site 02.07.2020
Additional description
"THE TYUMEN INDUSTRIAL UNIVERSITY"
Of Iddo, Zechariah
Discipline: Operation of gas pipelines
Control and laboratory work
Of Iddo, Zechariah
Discipline: Operation of gas pipelines
Control and laboratory work
Reviews
No reviews yet
Secure deal
Instant delivery
al_ac
0
Cumulative discount
100 $ | the discount is 10% |
50 $ | the discount is 5% |
20 $ | the discount is 2% |
Check your discount
Amount of purchases from the seller: $
Your discount: %
al_ac
0
Cumulative discount
100 $ | the discount is 10% |
50 $ | the discount is 5% |
20 $ | the discount is 2% |
Check your discount
Amount of purchases from the seller: $
Your discount: %