Technical description and user manual comb

It is fully lined with a technical description and user manual crank radio combined R-142N in the electronic version.
Technical description contains information about technical data, the purpose and structure of the combined radio R-142N, individual blocks of the device R-142N, assemblies and products in general.
The operating instructions contain:
Table of Contents.

INTRODUCTION.

1.Naznachenie CSV R-142N.
2. Technical CSV DATA R-142N.
3. Table of Technical Data antennas CSV R-142N.
4. COMPOSITION CSV cattle P-142N.
5.Opisanie wiring diagrams and appointment components crank R-142N.
6. Structure and function blocks CSV R-142N.
7.RAZMESCHENIE And Mounting the crank R-142N.

INSTRUCTIONS CSV R-142N.

1. GENERAL INFORMATION

2. SAFETY PRECAUTIONS CSV R-142N.
2.1. General instructions.
2.2. Recommendations to ensure the electrical crank R-142N.
2.3. Recommendations for corrective gassed body
carbon monoxide R-142N.
2.4. Recommendations for maintenance CSV R-142N.
2.5. Recommendations on fire safety crank R-142N.

3. SITE SELECTION AND PREPARATION cattle to doing RADIO parked CSV R-142N.

3.1. Siting cattle CSV R-142N.
3.2. Evaluation of the selected location crank R-142N.
3.3. Foundation PC to conduct radio parked CSV P-142N.

4. PREPARING cattle to doing RADIO MOTION CSV R-142N.

5. DEPLOYMENT antenna device crank R-142N.

5.1. Antenna selection CSV R-142N.
5.2. Deploying whip antennas CSV R-142N.
5.3. Deploying the combination antenna on a telescopic mast CSV R-142N.
5.4. The deployment of anti-aircraft antenna radiation CSV R-142N.
5.5. Deploying dipole antenna (with telescopic masts) KSHM P-142N.

6. CHECK POWER SUPPLIES AND PREPARATION FOR OPERATION cattle P-142N.

6.1. Check power supply cattle CSV R-142N.
6.3. Remote start and checking the electric plant AB-1-P / 30-M1-P-142N P crank.
6.4. Stop the generating AB-1-P / 30-M1-N R-142N crank.
6.5 Charge the battery crank R-142N.

7. Enable and configure the radio R-111, R-130, R-123 (P-142N).

7.1. Setting up a radio station R-111 combined antenna raised on a 11-meter telescopic mast.
7.2. Setting up a radio station R-130M.
7.3. Setting up a radio station R-123MT to the HRA.
7.4. Setting up a radio station R-123MT in a smooth band.
7.5. Setting up a radio station R-123MT a combined antenna raised on I-m telescopic mast.
7.6. Setting up a radio station R-809M2.

8. The main activities cattle CSV R-142N.

8.1. Intercom between crew members CSV R-142N.
8.2. Intercom cattle along the lines of crank R-142N.
8.3. Communication Mode A radio with jobs CSV cattle P-142N.
8.4. Communication radio mode B with jobs cattle CSV R-142N.
8.5. Contact stations with line L2 Mode A crank R-142N.
8.6. Contact stations with line L1 mode B crank P-142N.
8.7. Communication stations in CW from the workplace P2 remote radio operator crank P-142N.
8.8. Collaboration with foreign radio cattle
in CW CSV R-142N.
8.9. Collaboration with foreign radio cattle
by telephone CSV R-142N.

9. RULES OF VERIFICATION OF PARTS cattle CSV R-142N.

9.1. Control and measuring devices and equipment CSV R-142N.
9.2. Check the power supply system and electrical crank R-142N.
9.3. Check the automatic switching on and off battery charge bortseti CSV R-142N.
9.4. Check the heater, filter ventilation system CSV R-142N.
Exterior lighting and CSV R-142N.
9.5. Check that the power supply BP-20,
PD-25 and PD-75 crank P-142N.
9.6. Check the electrical parameters of the BPS CSV P-142N.
9.7. Check sensor F-014D CSV R-142N.
9.8. Check light panel CSV R-142N.

10. Technical condition of cattle CSV R-142N.

11. TROUBLES AND REMEDIES CSV R-142N.

12. STORAGE CSV P